Value Added Tax - VAT
VAT. All prices shown on our website include VAT at 23%.
If you need a VAT invoice please fill in the "Business Name" field at checkout and you will receive a VAT invoice showing the breakdown of VAT.
VAT exempt customers or VAT register customers from the rest of the EU please email [email protected] and we can create an exempt account those purchase
We offer free same day dispatch for all parcel orders over €79 (incl. Vat) otherwise a delivery charge of €8.99 (incl. VAT) will be applied to your order. We use Nightline/UPS couriers who have an impressive next business day delivery record of 98%.
Silverline 250 kgs Electric Hoist
This electric hoist can lift 125 kg to 11.0 m or 250 kg to 5.5 m. Electric hoist safety features include thermostatic overload cut-out, auto switch-off lever when cable fully winds in an emergency stop switch. 220~240 volts regular 3 pin plug fitted.
Note: Beam rollers are not required for fixed installation but if you intend to make a roller system then two beam rollers will be required as the hoist needs to be kept level during operation for the wire rope to feed back on to the drum correctly.
The full lift height is available at half the max rating of the winch. For full capacity, the lifting hook is attached back on to the unit itself and a pulley and hook (supplied) is attached to the line. This halves the speed and the lift height but doubles the lift capacity. A bit like a low gear.
It is about 1.8m. We have not seen any manufacturer offer a longer one. Unicraft says it is because if they supplied it with a longer one the operator could move away from the hoist without having sight of it. So whilst you can extend the cord it becomes your responsibility to make sure the hoist can be operated safely.
The hoist comes with 2 square brackets that can be attached with bolts (supplied) through 4 pre-drilled and tapped holes on the top of the hoist. These brackets are sized to clamp onto 40 x 40 mm box section.