179.00
(Including VAT)

More than 2 in stock

20 days
Price in points: 179 points
Reward points: 4 points
+
Klarna Interest Free Payments

For purchases between €35 and €1000, you will be offered the option to pay in 3 instalments through Klarna at checkout. One third today, one third in 30 days and the final one third in 60 days.

Or you can choose to pay the full amount today with Stripe.

Delivery
Payment options
Good to know
For the Silverline Drill Press
  • VAT
  • Delivery Costs
  • Returns

Silverline Bench Pillar Drill

Craft or DIY drill press with 5-speed belt drive, and a maximum drilling depth of 50mm without moving the workpiece. For accurate and repeat drilling. Strong cast base and machine table. 13mm keyed chuck capacity.
Drill Press Specs:
  • Voltage 230 Volts - 3 Pin Plug Fitted
  • Power 350 Watts
  • Operating Time 15 minutes and wait to cool
  • No Load Speed 600-2600 min
  • Chuck Size 13mm
  • Speeds 5
  • Table Size 160 x 160mm
  • Table Tilt +-45 Degrees
  • Chuck centre to pillar 104mm
  • Chuck to Base (Max) 250mm
  • Chuck to Table 0-174mm
  • Chuck Spindle Travel 50mm
  • Weight 17kgs
Electrical
Volts:
220-240 Volts
Phase:
Single
AC or DC Supply:
AC
Motor Type:
AC
Hertz:
50 Hz
Watts (Input):
350 Watts
Amps (Input):
1.5 Amps
Starting Amps Approx.
:
2.5 Amps
Horse Power (Input):
0.5 hp
Plug Fitted:
Yes
NVR Switch:
Yes
General
Total Weight (Kgs):
17 Kgs

> Open

Sort by:
5
Delivery
Product
Commuinication
I only read the other reviews when I was leaving this one. For the money this is a good DIY drill. I have given it a lot of use for...
0 0
4.3
Delivery
Product
Commuinication
Flimsy plastic guard and debt gauge, snapped off after little use, lever handles came loose very easily
0 0
4.3
Delivery
Product
Commuinication
Ok drill except for the light plastic guard and depth gauge which snapped off after little use. Also handle became loose very easily.
0 0
5
Delivery
Product
Commuinication
I spent a day drilling out studs in leather products. It behaved perfectly. It is quite small at about 50cm high.
0 0
5
Would be nice to have rack and pinion for raising/lowering table but I have to give five stars for value for money. Assembly is easy enough. Very quick delivery.
0 0
5
Got delivered in 24 hrs. Very easy to assemble and does everything it said on the tin.
0 0
5
Got this drill press to give as a present. Was easy to put together and is well made.
0 0
5
Using this for doing small bits on my car was great value for what I needed.
0 0
Write a review
Possibly you may be interested