- VAT
- Delivery Costs
- Returns
Value Added Tax - VAT
VAT. All prices shown on our website include VAT at 23%.
If you need a VAT invoice please fill in the "Business Name" field at checkout and you will receive a VAT invoice showing the VAT breakdown.
VAT exempt customers please email [email protected] and we can create an exempt account for those purchases.
EU VAT Registered VAT register customers from the rest of the EU should fill in their VAT number at the checkout for the removal of VAT.
We offer free same day dispatch for all parcel orders over €99 (incl. Vat) otherwise a delivery charge of €9.99 (incl. VAT) will be applied to your order. We use DPD & UPS couriers who have an impressive next business day delivery record of 98%.
Special Orders. Products listed as Special Orders will have an expected delivery time listed beside the Special Order status on the product page.
Returns
Holzstar Table Saw - TKS 254 PRO w/ Sliding Table
This 3 hp cast iron table saw from Holzstar comes complete with a sliding table and rip fence for maximum versatility. It is manufactured from painted and galvanized steel for protection against corrosion and top table and sliding table are cast iron.
There are side and rear table extensions for added material support. This saw has a cast iron trunnion. The saw blade can be tilted from 90 ° through to 45 ° to the left and can be set at any angle in between via an easily adjustable handwheel, and is fitted with a saw blade guard.
It is fitted with a large central suction connection of Ø 100 mm and Ø 30mm suction hose to the saw guard. Height adjustment of the saw blade is also easily adjusted via handwheel and is infinitely adjustable between 0 and 80mm. Stable and rigid suspension of the saw unit at the front and rear allows precise cuts. This saw has a powerful motor equipped with thermal overload protection.
If the sliding table is listed as optional then it is available at an additional cost.
Yes. there are four very important issues to remember. These tips will help you get long and satisfactory use of your machine. The first is that the table surface of the saw and any sliding carriage or extensions attached must be cleaned and degreased thoroughly before the first operation and then have a protective coat applied to the surface. These surfaces should offer little resistance to the movement of the wood passing over it. This will require regular maintenance and application over the life of the machine. The second is that there must be adequate dust collection at all times and that the blade tilting and raising mechanisms and other areas prone to dust and chip build-up must be blown off regularly. The third issue to be aware of is that during the early operation of your saw any drive belts must be inspected and re-tensioned as required. The final piece of advice we would offer is that using an appropriate sharp blade is more critical than having extra horsepower.