Loncin 1" Water Pump

4 Stroke. It takes straight petrol, no need to add oil to the petrol.

The simple answer is as short as possible. 3.3 metres is good. The closer to the water you can place the pump the better. The closer you are the higher the output.

The simple answer is as short as possible. 3.3 metres is good. The close to the water you can go the better. The closer you are the higher the output.

Yes, but you do need to fill the pump chamber with water before starting. You do not need a non-return valve at the end of the suction pipe nor do you need to fill the pipe with water before attaching it.

1. Remove the screw cap from the top of the pump housing and fill it with water until it starts flowing out of the upper hose connection fitting.

2. Place on firm level ground before use. Avoid placing on a concrete pad or on crushed or broken stone. This can lead to significant damage to the pump housing/engine.

3. The lower hose connection point is for the suction hose. This should be a high strength flexible hose that will not collapse under vacuum pressure. Make sure the supplied O rings are fitted when fitting for the suction hose or the pump will be unable to suck water.