479.00
(Including VAT)
In Stock: 1 item(s)
20 days
Price in points: 479 points
Reward points: 10 points
+
Klarna Interest Free Payments

For purchases between €35 and €1000, you will be offered the option to pay in 3 interest free instalments through Klarna at checkout. One third today, one third in 30 days and the final one third in 60 days.

Delivery
Payment options
Good to know
For the Craft Stick 201P
Starparts Auto Welders Helmet / Mask
69.00 (Including VAT)
Our Normal Low Price: 79.00
+
  • VAT
  • Delivery Costs
  • Returns

Schweisskraft Craft Stick 201P ARC Welder

This 200 amp ARC welder from Schweisskraft has built-in inverter technology and is generator friendly. A sealed circuit protects this welder against moisture, salt spray and corrosion making it suitable for use offshore. This welder has PFC (Power Factor Correction) so it is suitable for use where voltage supply is low or on extension leads. The digital display allows for accurate adjustment of the welder's output. This welder includes a range of features such as hot start, where the welder automatically increases the welding current temporarily, to safely ignite and stabilise the arc, an anti-stick feature automatically reduces the welding current when the electrode accidentally gets stuck, this prevents the electrode from annealing and the ARC force control monitors the welding current and voltage and eliminates short circuits quickly and safely. Also equipped with VRD (voltage reduction at idle) This welder is supplied with a 3m electrode holder and earth.

Key Features

  • Modern Inverter Technology - for the professional user
  • 220 Volt
  • ARC / DC Lift TIG
  • Sealed Circuit
  • Hot Start
  • Anti-Stick
  • ARC Force Control
  • Generator Friendly
  • 3m Electrode Holder and Earth Lead
Electrical
Volts
220 - 240 Volts
Phase
Single
Hertz
50-60 Hz
Generator Friendly
Plug Fitted
No
ARC Welder
ARC DC Current Range (A)
10 - 200 Amps
Max Recommended Electrode
4.0 mm
ARC Power Steps
Variable
ARC Duty Cycle
40% at 200A @ 40 °C
ARC No-Load Voltage
68.7Volts
ARC Electrode Holder
Electrode Holder Included
TIG Welder
TIG DC Current Range (A)
10 - 200 Amps
TIG Start
Scratch Start
TIG Duty Cycle
40% at 200A @ 40°C
Pre Gas
Valve Control
Post Gas
Valve Control
Slope Up
No
TIG Torch Included
No TIG torch
General
Protection/Insulation Class
IP 21S
Earth Lead
Yes, included.
Warranty
12 Mths
Total Weight (Kgs)
6.1 Kgs
Find similar

Schweisskraft Arc Welder CRAFT STICK-141_161_161P_201P Manual Open

No posts found

Write a review
Possibly you may be interested