649.00
(Including VAT)
Out of stock
20 days
Reward points: 13 points
Delivery
Payment options
Good to know

Order over €100?Guarantee for all purchased goods in our online store is 12 months

Same Day DispatchYou receive SMS messages about each stage of your order.

We Stock What We SellYou can return the items purchased within 14 days. The goods must be in normal condition and have all the factory packages.

20 Day Return on Most ItemsPay orders in convenient ways: cash to the courier, by bank transfer on the receipt of the bank or by credit card right at the time of the order.

VAT IncludedAll prices shown include VAT

Free Delivery (Excl. Pallets, Gas, SO)All prices shown include VAT

For the Triton Planer
Notify Me When Back in Stock Notify Me When Back in Stock

We (ieDepot) will add your email address to a special mailing list for this product. Once the product is in stock, you’ll get an email about it automatically, and your email address will be removed from the product’s mailing list.

The data will be visible to some members of our staff. If you’d like to have your personal data removed, send an email to [email protected]

If you believe that your personal data has been misused, you have the right to lodge a complaint with a supervisory authority. We’re obliged by EU General Data Protection Regulation to let you know about this right; we don’t actually intend to misuse your data.

  • VAT
  • Delivery Costs
  • Returns

Triton 12 Inch Planer Thicknesser

High-performance planer/thicknesser with 317mm (12.5") cutting width. 17,500 cuts per minute. Easy, accurate setting of depth of cut in 1.58mm (1/16") increments. Cutter height: 3.2-152mm. 4-post column design for smooth, accurate vertical movement. Large infeed and outfeed tables for added material support. Circuit breaker for electrical safety. Dust chute for efficient dust extraction. 2 year warranty when registered within 30 days of purchase.
Planer Thicknesser Specifications:
  • Voltage: 220V - 240V
  • Power: 1100W / 1.5hp
  • Cuts per min: 17,500min-1
  • Cutter head speed: 8750min-1
  • Planing height: 3.2mm x 152mm (0.1 x 6")
  • Planing width: 317mm / 12.5"
  • Table size: 317mm (12.5") x 238mm (9.37")
  • Insulation: Double insulated
  • Net weight: 29 kg


Electrical
Volts:
220-240 Volts
Phase:
Single
AC or DC Supply:
AC
Motor Type:
Induction
Hertz:
50 Hz
Watts (Input):
1100 Watts
Amps (Input):
5 Amps
Starting Amps Approx.
:
9 Amps
Horse Power (Input):
1.5 hp
RPM:
8750 rpm
Plug Fitted:
Yes
NVR Switch:
Yes
Emergency Stop:
Yes
Thicknesser/Surfacer
Max Planing Width mm:
317mm
Thicknesser Bed Length mm:
600mm
Min./Max. Material Thickness mm:
3.2/152mm
Max Thicknessing Cut mm:
2.38mm
Feed speed
:
6m/minute
Cuts per Minute :
17500
No of Knifes/Blades:
2
General
Dust Extraction Port mm:
50mm
Registration Required:
Yes
Warranty w/o Registration
:
1 Months
Warranty w/ Registration:
36 Months
Total Weight (Kgs):
34 Kgs

Triton Planer 583534 Manual Open

Sort by:
5
Delivery
Product
Commuinication
I bought this after looking at the online reviews. I have run about a thousand feet of oak through it without any issues. Good planer.
0 0
5
This is a great little planer for the price. I bought this from this Irish website as I’ve had serious issues with amazon packages three weeks late or not showing...
0 0
5
very impressed with the build and finish. Planed an old floor we were restoring without any issues. Did trip it out when we tried feeding a few boards at once....
0 0
1
not great had it a few weeks stoped working will never buy one of these again
0 0
5
Overall a very good planer. Eats through boards up to 9 inches after that you need to take smaller amounts. Folds up nicely and is easy to move from job...
0 0
4
Good one. Few things could be better but for this price is ok.
0 0
Write a review
Are there any special tips for planer & thicknessers?

Yes. there are five very important issues to remember. These tips will help you get long and satisfactory use of your machine. The first is that the beds of both planers and thicknessers must be cleaned and degreased thoroughly before the first operation and then have a protective coat applied to these surfaces such as wax or other machine protection coating. These surfaces should offer little resistance to the movement of the wood passing over it. This will require regular maintenance and application over the life of the machine. The second is that there must be adequate dust collection at all times and that the feed mechanisms and other areas prone to dust and chip build-up must be blown off regularly. The third issue is that particularly during their early operation their drive belts must be inspected and re-tensioned as required. Number four would be not to overload the machine by attempting to plane too much in one pass. The final piece of advice we would offer is that sharp blades are critical to the satisfactory operation of your planer and should be changed as required.

Possibly you may be interested