Price in points: 15 points
1 item(s)

14.24
(Including VAT)

Our Normal Price: 14.99
  • TIG Gas Adaptor
  • Dinse 1
  • 3/8" Female Nut
+

TIG Dinse 1 Adaptor & Gas Hose

The 3/8" BSP female gas tail line can be connected to either the welder or the regulator. The opposing 3/8" BSP male connector is used to attach the torch. When the gas line is connected to the regulator, you must use a torch with a valve. If you use this method you will have to control the flow of gas using the valve on the torch. When this line is connected to the welder, you can use a torch without a valve as the machine turns on and off the flow of gas using a solenoid.

Non-returnable consumable.

No posts found

Write a review

Good to know