359.00
(Including VAT)

In Stock

20 days
Price in points: 359 points
Reward points: 7 points
+
Klarna Interest Free Payments

For purchases between €35 and €1000, you will be offered the option to pay in 3 interest free instalments through Klarna at checkout. One third today, one third in 30 days and the final one third in 60 days.

Delivery
Payment options
Good to know
For the Unicraft MES 999
Unicraft 1 Ton Hoist Support Arm
99.00 (Including VAT)
+
Unicraft 1 Ton Beam Roller
119.00 (Including VAT)
+
  • VAT
  • Delivery Costs
  • Returns

Unicraft MES 999-2 Electric Hoist

This electric hoist can lift 500 kg to 12m and 999kg to 6m. Includes a deflection pulley with a load hook and a dead-man switch for safe work. The operation switch has an IP54 protection rating. Fitted with a limit switch to shut off the motor once it reaches to highest or lowest position. Supplied with two 60 x 60mm attachment brackets and bolts.

  • Lifting Capacity
    • without deflection pulley: 500kg - 12m
    • with deflection pulley: 999kg - 6m
  • Supply: 230V ~ 50Hz
  • 1600 Watts
  • Max Lifting Speed: 8m/min without the deflection pulley and 4m/min with.
  • Cable Diameter: 6mm
  • Weight: 33kg

Note: Beam rollers are not required for fixed installation but if you intend to make a roller system then two beam rollers will be required as the hoist needs to be kept level during operation for the wire rope to feed back on to the drum correctly.

Location-All_Details
1120-A2-R3-B3-S1
Electric Hoist
Load Capacity (Ton)
1 Ton
Lifting Height (m)
6/12m
Lifting Speed (m/min)
4/8 m/min
Find similar

MES 999 Hoist Manual Open

Sort by:
4.7
Delivery
Product
Commuinication
I was surprised when it arrived the following day. It is a hefty well-built hoist. It cannot be hung from a neam dolly or installed even a little off level...
0 0
4
Powerful winch but could do with a longer cable for the controller
0 0
Write a review
Is there a beam trolley for this winch?

Not specifically. You could however use two 1 ton beam trolleys with a bar attached across the two of them. Using one would not be possible as the hoist needs to stay level whilst in operation.

Possibly you may be interested