- VAT
- Delivery Costs
- Returns
Value Added Tax - VAT
VAT. All prices shown on our website include VAT at 23%.
If you need a VAT invoice please fill in the "Business Name" field at checkout and you will receive a VAT invoice showing the VAT breakdown.
VAT exempt customers please email [email protected] and we can create an exempt account for those purchases.
EU VAT Registered VAT register customers from the rest of the EU should fill in their VAT number at the checkout for the removal of VAT.
We offer free same day dispatch for all parcel orders over €99 (incl. Vat) otherwise a delivery charge of €9.99 (incl. VAT) will be applied to your order. We use DPD & UPS couriers who have an impressive next business day delivery record of 98%.
Special Orders. Products listed as Special Orders will have an expected delivery time listed beside the Special Order status on the product page.
Returns
Holzstar TKS 200 Table Saw
This 1.5 hp table saw from Holzstar is made from painted galvanized steel to prevent corrosion and the tabletop and sliding table are both cast iron. It has a maximum cutting depth of 60mm and can be adjusted infinitely between 0mm and 60mm via a handwheel. The saw blade is fitted with a saw blade guard and can be tilted from 90 ° through to 45° via a handwheel and can be set at any angle in between.
Height adjustment of the saw blade can also be easily scaled via a handwheel. The saw unit is attached to both the front and rear of the saw for stability resulting in high precision cutting. The saws powerful motor is equipped with thermal overload protection. The saw has a dust extractor connection of Ø 100mm and the saw blade guard is also fitted with a Ø 30mm suction hose. Includes 200 x 30 x 2.8mm 30T blade.
If the sliding table is listed as optional then it is available at an additional cost.
Yes. there are four very important issues to remember. These tips will help you get long and satisfactory use of your machine. The first is that the table surface of the saw and any sliding carriage or extensions attached must be cleaned and degreased thoroughly before the first operation and then have a protective coat applied to the surface. These surfaces should offer little resistance to the movement of the wood passing over it. This will require regular maintenance and application over the life of the machine. The second is that there must be adequate dust collection at all times and that the blade tilting and raising mechanisms and other areas prone to dust and chip build-up must be blown off regularly. The third issue to be aware of is that during the early operation of your saw any drive belts must be inspected and re-tensioned as required. The final piece of advice we would offer is that using an appropriate sharp blade is more critical than having extra horsepower.