- VAT
- Delivery Costs
- Returns
Value Added Tax - VAT
VAT. All prices shown on our website include VAT at 23%.
If you need a VAT invoice please fill in the "Business Name" field at checkout and you will receive a VAT invoice showing the VAT breakdown.
VAT exempt customers please email [email protected] and we can create an exempt account for those purchases.
EU VAT Registered VAT register customers from the rest of the EU should fill in their VAT number at the checkout for the removal of VAT.
We offer free same day dispatch for all parcel orders over €99 (incl. Vat) otherwise a delivery charge of €9.99 (incl. VAT) will be applied to your order. We use DPD & UPS couriers who have an impressive next business day delivery record of 98%.
The vast majority of parcel orders received on a business day before 3 pm will be dispatched the same day for delivery the next business day.
Pallets are shipped at a reduced cost, which is stated on the individual product pages where applicable. Pallet delivery times are typically 1-2 business days, but check individual product descriptions for better guidance.
Special Orders. Products listed as Special Orders will have an expected delivery time listed beside the Special Order status on the product page.
Returns
You may return most new unused products (special orders, dated items and consumables are non-returnable) that are in a resalable condition within 20 days of delivery for a full refund. Please make sure the products are in their undamaged original packaging and packaged correctly. Please see full return requirements at the bottom of the page. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). You must inform us within 2 days of delivery if the item is incorrect, damaged or defective. Please note that means for gifts or items that you are not going to use for a while that you should open and inspect your purchases upon receipt.
You should expect to receive your refund within 7-10 days of giving your package to the return shipper. This time period includes the transit time for us to receive your return from the shipper, the time it takes us to process your return once we receive it, and the time it takes your bank to process our refund request.
Silverline Bench Pillar Drill
Craft or DIY drill press with 5-speed belt drive, and a maximum drilling depth of 50mm without moving the workpiece. For accurate and repeat drilling. Strong cast base and machine table. 13mm keyed chuck capacity.
Drill Press Specs:
- Voltage 230 Volts - 3 Pin Plug Fitted
- Power 350 Watts
- Operating Time 15 minutes and wait to cool
- No Load Speed 600-2600 min
- Chuck Size 13mm
- Speeds 5
- Table Size 160 x 160mm
- Table Tilt +-45 Degrees
- Chuck centre to pillar 104mm
- Chuck to Base (Max) 250mm
- Chuck to Table 0-174mm
- Chuck Spindle Travel 50mm
- Weight 17kgs
Location-All_Details
1390-S2
Electrical
Volts
220 - 240
Volts
Phase
Single
Motor Type
AC
Hertz
50
Hz
Watts (Input)
350 Watts
Amps (Input)
1.5 Amps
Horse Power (Input)
0.5 hp
Plug Fitted
Yes
NVR Switch
Yes
General
Total Weight (Kgs)
17 Kgs
Sort by:
12/04/2022, 20:08
I only read the other reviews when I was leaving this one. For the money this is a good DIY drill. I have given it a lot of use for...
I only read the other reviews when I was leaving this one. For the money this is a good DIY drill. I have given it a lot of use for small work and no issues yey
16/07/2021, 08:35
Flimsy plastic guard and debt gauge, snapped off after little use, lever handles came loose very easily
15/09/2019, 13:10
I spent a day drilling out studs in leather products. It behaved perfectly. It is quite small at about 50cm high.
1
03/10/2017, 11:58
Would be nice to have rack and pinion for raising/lowering table but I have to give five stars for value for money. Assembly is easy enough. Very quick delivery.
1
09/05/2016, 21:16
Got delivered in 24 hrs. Very easy to assemble and does everything it said on the tin.
1
10/05/2015, 13:05
Got this drill press to give as a present. Was easy to put together and is well made.
1
06/04/2015, 21:54
Using this for doing small bits on my car was great value for what I needed.